- Excavators[10]
- Loaders[10]
- Other Construction Machinery[4]
- Pavers[8]
- Road Roller[5]
- Cranes[10]
- Drilling Rig[10]
- Other Mining Machinery[6]
- Iron Ore[2]
- Hammer[1]
- Drill Bit[2]
- Tow Truck & Wrecker[2]
- High-altitude Operation Truck[8]
SC60.8 Hydraulic Excavator
1,SC60.8 excavator on power performance, operation, reliability and maintainability aspects
2.low fuel consumption
SC60.8 Hydraulic Excavator
SC60.8 excavator on power performance, operation, reliability and maintainability aspects, such as running through a whole new concept of design.World famous brand of engine---Japan Yanmar engine, compared with the same type engine with low noise, low fuel consumption;Working device with 3 pumps confluent technologies, productivity approximately 20% higher than the domestic similar configurations, high efficiency is obviously a big advantage.
Parameters | Unit | Reference values |
Bucket rods cylinders |
| 85×55 |
Engine | ||
Type |
| YANMA |
Way |
| Four-stroke, water-cooled, vertical, direct injection |
Number of cylinders (bore x stroke) | (mm) | 4-94×110 |
Total piston displacement | (L) | 3.054 |
Rated output power | (Kw/rpm) | 35.5/2200 |
Maximum torsional moment | (N.M/rpm) | 214/1320 |
Starter motor | (Kw) | 12V,3 |
AC generator | (A) | 12V,55 |
Storage battery | (v,Ah) | 12V,120 |
Working device standard | ||
Standard bucket | m3 | 0.22 |
Walking section | ||
Support sprockets on each side | Unit | 1 |
Each side of the supporting roller | Unit | 5 |
Creeper standard crawler (450mm), on each side | Unit | 38 |
Track centre distance | (mm) | 1560 |
Track contact length | (mm) | 2000 |
Hydraulic systems/control valve (JELL) | ||
Type |
| 8MCV16N |
Control method |
| Hydraulic pilot |
Travel motor (JELL) |
| Plunger-type (with brake valve, parking brake) X2 |
Slewing motor (JELL) |
| Plunger-type (with safety valve, parking brake) X1 |
Hydraulic systems/hydraulic pump (REXROTH) | ||
Type x number |
| -Plunger pump XL |
Flow | (L/min) | Plunger: 145.6 |
Set pressure | (Mpa)(Kg/cm2) | Plunger: 23 |
Hydraulic systems/hydraulic cylinders (reciprocating plunger-type) | ||
Boom cylinder |
| 110×55 |
Bucket hydraulic cylinder |
| 85×55 |
Bulldozing the fuel tank |
| 110×60 |
Full length (transport) (mm)
| 5960
|
Full height (arm) (mm)
| 1995
|
Overall width (mm)
| 1960
|
Car-body full-height (CAB) (mm)
| 2690
|
Minimum ground clearance (mm)
| 360
|
Minimum of working device of gyration (mm)
| 2380
|
Track contact length (mm)
| 2000
|
Track length (mm)
| 2560
|
Track gauge (mm)
| 1560
|
Track width (mm)
| 1960
|
Abdominal belt width (mm)
| 400
|
Track plate thickness (mm)
| 26
|
Minimum of working device of gyration top height (mm)
| 4395
|
Rear swing radius (mm)
| 1700
|
Maximum digging height (mm)
| 5750
|
Maximum dumping height (mm)
| 3980
|
Maximum digging depth (mm)
| 3860
|
The maximum vertical dig depth (mm)
| 3040
|
Maximum digging RADIUS (mm)
| 6170
|
Maximum digging RADIUS (mm)
| 6180
|
Bucket maximum digging force (kN) | 38.5
|
Rotating speed (RPM) | 9.5
|
Travel speed (km/h) | L:2.2 H:4.2
|
Climbing capacity | 30
|
Ground pressure (kPa) | 33.5
|